CG24ECMP(S) / CG24ECM(S)
Grasstrimmer / Brushcutter with Bike Handle
automatically adjusts the throttle according to the load on the cutting blade.
Note: the governor mechanism does not work when the throttle is fully open.
The Wind Governor Mechanism maintains a constant rpm by adjusting the throttle according to the load on the cutting blade.
This prevents the blade from being tangled with grass.
Almost the same power as higher class models.
(The Wind Governor Mechanism maintains a constant rotation speed, thus allowing for more power.)
* When using a blade included as standard, with 7500/min no load speed
Work volume (when the work volume of our previous models is indexed at 100.)
*1: Our conventional brush cutters' / grass trimmers'
*2: When using a cutting blade included as standard, with 7500/min no load speed.
The weight has been greatly reduced compared to the CG24EAS/CG24EAP2 engine brush cutters/grass trimmers.
* Without the fuel, blade, cutter cover and shoulder belt.
- Spindle lock for easy blade change
The spindle can be locked by simply pressing a stopper pin.
- Asymmetrical bike handles
provide stress free operation and helps to reduce fatigue.
The cutting blade speed setting for when the throttle trigger is fully pulled can be adjusted by turning a knob.
Foam cushion supports the waist for less vibration to the operator.
reduces the amount of pull force required to start the engine.
||TORCH L7RTC (Compatible with NGK BPMR7A)
|Fuel Tank Capacity
|Dry Weight *1
||Metal Blade (255mm)
|Sound Pressure Level LpA
|Sound Power Level LwA
(Front / Left Handle)*2
(Rear / Right Handle)*2
*1 Without the fuel, blade, cutter cover and shoulder belt.
*2 Equivalent noise level/vibration level are calculated as the time-weighted energy total for noise/vibration levels under various working conditions with the following time distribution: 1/2 Idle, 1/2 racing.