Skip to main content

Hitachi

Hitachi Koki Co.,Ltd.

CG27ECMP(S) / CG27ECM(S)

Grasstrimmer / Brushcutter with Bike Handle

Equipped with a Super Lightweight Engine
CG27ECMP(S)/CG27ECM(S) Grasstrimmer / Brushcutter
  • Pure Fire
  • Wind Governor Mechanism
automatically adjusts the throttle according to the load on the cutting blade.
Under a low load high cooling air ?ow pushes the governor plate upward to close the throttle for preventing excessive rotation speed.Under a high load lower cooling air flow allows the governor plate to move down and opens the throttle for preventing rotation speed from decreasing.
Note: the governor mechanism does not work when the throttle is fully open.
  • Easy to operate
The Wind Governor Mechanism maintains a constant rpm by adjusting the throttle according to the load on the cutting blade. This prevents the blade from being tangled with grass.
  • Powerful
Almost the same power as higher class models Almost the same power as higher class models.
(The Wind Governor Mechanism maintains a constant rotation speed, thus allowing for more power.)
* When using a blade included as standard, with 7500/min no load speed
  • Fuel efficient
When using a cutting blade included as standard, with 7500/min no load speed Work volume (when the work volume of Hitachi's previous models is indexed at 100.)

*1: Hitachi conventional brush cutters' / grass trimmers'
*2: When using a cutting blade included as standard, with 7500/min no load speed.

  • Lighter in weight
Lighter in weight The weight has been greatly reduced compared to the CG27EAS/CG27EAP2 engine brush cutters/grass trimmers.

* Without the fuel, blade, cutter cover and shoulder belt.
  • Spindle lock for easy blade change
Spindle lock for easy blade change The spindle can be locked by simply pressing a stopper pin.
  • Asymmetrical bike handles
Asymmetrical bike handle provide stress free operation and helps to reduce fatigue.
  • Throttle adjustment knob
Throttle adjustment knob The cutting blade speed setting for when the throttle trigger is fully pulled can be adjusted by turning a knob.
  • Waist support cushion
Waist support cushion Foam cushion supports the waist for less vibration to the operator.
  • S-start
reduces the amount of pull force required to start the engine.

Specifications

Model CG27ECMP(S) CG27ECM(S)
Engine Displacement 26.9mL (cc)
Spark Plug TORCH L7RTC (Compatible with NGK BPMR7A)
Max. Power 0.81kW
Fuel Tank Capacity 400mL (cc)
Dry Weight *1 4.4kg
Cutting Attachment Type (Dia.) Metal Blade (255mm)
Sound Pressure Level LpA
(ISO22868)
Equivalent *2 85dB (A)
Uncertainty 3dB (A)
Sound Power Level LwA
(2000/14/EC)
Measured Racing 105dB (A)
Guaranteed Racing 107dB (A)
Vibration Level
(ISO22867)
Equivalent
(Front / Left Handle)*2
4.1m/s2
Equivalent
(Rear / Right Handle)*2
3.9m/s2
Uncertainty 1.5m/s2

*1 Without the fuel, blade, cutter cover and shoulder belt.
*2 Equivalent noise level/vibration level are calculated as the time-weighted energy total for noise/vibration levels under various working conditions with the following time distribution: 1/2 Idle, 1/2 racing.