HITACHI-koki himac : Products : Micro UltraCentrifuges

Life-science > Products > Micro UltraCentrifuges

Micro Ultracentrifuges

CS150GXL

CS120GXL

Features

Reduce separation times and improve laboratory efficiency with the world's most powerful micro ultracentrifuge. In addition to having the world's highest speed (CS150GXL), and high performance, both of these models are unusually compact and quiet, to fit unobtrusively into the laboratory environment. They have a 20% smaller footprint than any previous Hitachi unit, and maximum noise output has been held to a very quiet 48 dB.

Specifications

Rotors for CS-GX Series

Features

Advanced technology

The world's highest speed: 150,000 rpm
The world's greatest RCF (x g) : 1,050,000 x g
(CS150GXL + S140AT rotor)
Drive unit warranted for 5 years
Non-contact imbalance protection
Safer, self-locking rotor

Easy operation

Real-time control (RTC)
Essential functions on screen

Safety and environmental impact

Dual CPU over-speed prevention mechanism
Powerful and accurate electronic refrigeration
Compliant with worldwide noise and EMC standards
Brake control system for reverting motor electric power to the power source side
Ecoproduct
Energy savings
Exceptionally low noise 48 dB or less

Specifications

Moled	CS150GXL	CS120GXL
Maximum speed (rpm)	150,000	120,000
Maximum RCF (x g)	1,050,000 (S140AT Rotor)	771,000 (S140AT Rotor)
Speed control accuracy (rpm)	±50 (5,000 to max. speed)
Maximum tube capacity	8 tubes x 12.0 ml (S55A Rotor)
Timer	1 min. to 99 hrs. and 59 min. with HOLD function With RTC function
Vacuum system	Oil rotary vacuum pump and oil diffusion pump Pressure range under 1.3 Pa
Rotor temp. control range	0 – 40ºC (1ºC increments)
Rotor cooling method	Thermo-module cooling system
Screen display	Adjustable LCD display
Rotor setting method	Quick setting (no special tool required)
Operational noise	48 dB (A scale, 1m in front)
Drive unit warranty	5 years
Dimensions (mm)	440 (W) x 490 (D) x 850 (H/panel closed) / 1,000 (H/panel open) / height to table is 780
Weight (kg)	110
Power requirements	AC 220, 230, 240 V ± 10%, 6 A (50/60 Hz) single phase
Standard accessories	Tool box and tool set, leveling base (4), instruction manual

Notes:

Rotors and tubes are not included with the centrifuges. Please purchase them separately, depending on your research purposes.
This unit can be installed only where:
- The floor is concrete or of similar solidity, and not likely to be affected by exterior vibration.
- As the power cord is 5.0 meters long, ensure that the power outlet is within 5.0 meters of the unit. (Earthing is required.)
The main unit of the centrifuge is designed for use with a quick setting rotor. If you need to use a conventional tightening rotor (for CS Series, CS-EX/FX Series), please contact your nearest Hitachi representative.
When ordering CS-GXL Series, please specify the supply voltage.

Products
Centrifuge
	Preparative Ultracentrifuges
	Micro Ultracentrifuges
	High-Speed Refrigerated Centrifuges
	High-Capacity Refrigerated Centrifuge
	Compact Centrifuges
	Blood Cell Washing Centrifuges
	Large-Scale Continuous Flow Ultracentrifuge
	Rotors, Adaptors, Tubes, Bottoles and Caps
Vacuum Pumps
Air Compressor
Application
Support
Contact us
Environment

page top

Terms of Use, etc.
	Copyright(C) 2000-2006 Hitachi Koki Co., Ltd All rights reserved .