  Rotors for CS-GX Series
 Fixed-angle rotor |
| S150AT |
9024211K |
150,000 |
901,000 |
1.0 x 8 |
2.0 x 8 ** |
6 |
| S140T |
9024351K |
140,000 |
1,050,000 |
1.0 x 10 |
2.0 x 10 |
5 |
| S120AT2 |
9024181K |
120,000 |
650,000 |
1.0 x 10 |
2.0 x 10 ** |
8 |
| S120AT3 |
9024191K |
120,000 |
650,000 |
0.5 x 14 |
0.5 x 14 |
8 |
| S100AT3 |
9024231K |
100,000 |
436,000 |
0.23 x 20 |
0.23 x 20 |
7 |
| S100AT4 |
9024241K |
100,000 |
541,000 |
3.0 x 6 |
4.0 x 6 ** |
16 |
| S100AT6 |
9024321K |
100,000 |
604,000 |
4.0 x 8 |
5.0 x 8 ** |
18 |
| S80AT2 |
9024251K |
80,000 |
358,000
304,000 |
0.5 x 20
0.5 x 10 |
0.5 x 30 |
14
17 |
| S80AT3 |
9024331K |
80,000 |
415,000 |
6.0 x 8 |
8.0 x 8 |
23 |
| S70AT |
9024261K |
70,000 |
307,000 |
0.5 x 20 |
0.5 x 20 |
31 |
| S55A |
9024361K |
55,000 |
260,000 |
10.0 x 8 |
13.5 x 8 |
56 |
| S55A2 |
9024371K |
55,000 |
201,000 |
1.5 x 12 |
1.5 x 12 |
40 |
 Neo angle rotors |
| S140NT |
9024223K |
140,000 |
752,000 |
2.0 x 8 *** |
2.0 x 8 *** |
6 |
| S120NT |
9024303K |
120,000 |
586,000 |
2.0 x 8 *** |
2.0 x 8 *** |
9 |
| S100NT |
9024313K |
100,000 |
479,000 |
4.0 x 8 *** |
4.0 x 8 *** |
12 |
 Vertical rotor |
| S120VT |
9024293K
|
120,000
|
501,000
|
2.0 x 8 ***
|
2.0 x 8 ***
|
8
|
 Swinging bucket rotor |
| S55S |
9024281K |
55,000 |
259,000 |
2.2 x 4 |
2.2 x 4 |
44 |
| S52ST |
9024341K |
52,000 |
276,000 |
5.0 x 4 |
5.0 x 4 |
79 |
Notes:
- *Nominal capacity of standard tube supplied with the rotor.
- **Indicates a seal tube. When using this, please place a separate order for STF2 tube sealer, tube rack and space cap. The STF2 tube sealer can also be used for ultracentrifuge rotors. (Refer to p. 8.)
- ***Indicates a seal tube. When using this, please place a separate order for STF2 tube sealer anAll rotor bodies are made of titanium alloy, except for S55A, S55A2 and S55S, which are made of aluminum alloy, though the buckets are titanium alloy.
- The S52ST rotor is used for the CS150GXL/120GXL centrifuges only.
- †To be mounted as standard equipment for all angle rotors, except for S100AT3, for which the opener cannot be used. The rotor cover can be easily opened or closed (for exclusive use with angle rotors for micro ultracentrifuges).
|
|
|
|
page top
