Tabletop Centrifuges

Making an Exciting and Colorful Debut

Form never seen before
Selective color variation
Sporty and speedy acceleration
Global-standard safety
Environment adaptable product standardized by Hitachi

CT6E

CT6EL

Specifications Rotors for CT6E Rotors for CT6EL

Features

USER-FRIENDLY

• Easy-to-use operator panel
• 5 sets of running parameters are programmable.
• Rotor stop signal is selectable from 5 melodies.
• Acceleration and deceleration settings are optimally selectable according to samples.

COMPACT

• Low-height body allows rotor to be loaded/unloaded smoothly and speedily!
  CT6E/CT6EL tabletop centrifuges are compact for smooth and speedy loading/unloading of samples. The height from the bottom to the opening is 270 mm (60 mm lower than conventional models.)

ECOPRODUCTS

Meeting Hitachi's environmental standards!

Hitachi himac CT6E/CT6EL tabletop centrifuges are environmentally-friendly.

• More recyclable, energy-saving and resource-saving than the conventional models
• Reduced the use of hazardous substances

GLOBAL STANDARD

Safer tabletop centrifuges!
Compliance withmarking requirements

Mechanical safety (Compliance with IEC 61010-2-020 requirements)

• CT6E/CT6EL tabletop centrifuges have passed the MCA (maximum credible accident) test.
• This test confirms that no fragments are expelled from the centrifuge in the event of an accident.

• Electrical safety (Compliance with IEC 61010-2-020 requirements)

• Operator safety is ensured even under a single fault condition.
• Double electric insulation construction for prevention shock events such as lightning, and all units have passed a general inspection under high-voltage conditions.

Electromagnetic compatibility (EMC Directive : Compliance with EN61326 and other requirements)

• Strong immunity to erroneous operation or other malfunction from external electromagnetic emissions. (Protection from nearby lightning strikes and static electricity in dry winter air.)
• Negligible electromagnetic emissions that would make peripheral equipment operate erroneously.

Specifications

Moled	CT6E	CT6EL
Maximum speed	6,000 rpm
	(T6AP angle rotor)	(T6AP2 angle rotor)
Maximum RCF	4,770 x g
	(T6AP angle rotor)	(T6AP2 angle rotor)
Maximum capacity	1,000 ml (250 ml x 4 tubes) (T5SS swing rotor)	2,000 ml (500 ml x 4 tubes) (T3S6 swing rotor)
Speed control range	300 to 6,000 rpm (in increments of 100 rpm)
Timer	1 minute to 99 minutes (in increments of 1 minute) with a HOLD function (continuous operation)
Acceleration/deceleration time variable	2-stage variable acceleration, 2-stage braked deceleration and coasting deceleration
Memory-based programmed operation	5 programmed operations possible (speed, run time, acceleration/deceleration settings and rotor stop signal)
Rotor stop signal	Selectable from 5 melodies, a beep tone and mute setting
Drive motor	Brushless DC motor (inverter control)
Safety device	Door interlock, dual overspeed detection, imbalance detection, motor temperature abnormality detection, etc.
Compliance with standards	Complies withmarking requirements.
Heat radiation	600W
Power requirements	Single phase , AC220-240V , 10A , 50/60Hz AC100-120V, 15A, 50/60Hz
Dimensions	440W x 595D x 330H	540W x 720D x 330H
Weight	45kg	55kg
Colors	Strawberry pink, mint blue and sherbet silver

Part No.