Hitachi Koki Home About us Environment What's new Products Network Contact us Power Tools Home
 


NT 65MA3
2-1/2" 15Gauge Finish Nailer 



Lightweight 4.2lbs
Capable of cleaning chips and sawdust of course it   drives nails thanks to the blow nozzle
Equipped with the same output mechanism as of   the NT65MA2 that well reputed with its rapid   driving response, good balance for easy
  one-handed operation
Equipped with SINGLE ACTUATION /   CONTACT ACTUATION switching device to
  meet the requirements of NEW ANSI
  SNT-101-2002
Simple drive-depth adjusting mechanism by dial
Easy-to-use clogged nail release mechanism
360°exhaust direction easily changeable
Rubber grip for comfortable handling
High capacity rear load magazine (15-gauge finish nail:100pcs)
A FULL SEQUENTIAL ACTUATION MECHANISM KIT
  is also available as an option (Code No.884320)

Specifications:
Actual Weight  1.9kg (4.2 lbs.)
Dimentions
(L x H x W)
 343mm x 305mm x 76mm
(13-1/2" x 12" x 3") 
Operating Pressure 5 - 8.5kg/cm²(70-120psi)
Air Consumption  1.20 ltr/cycle at 7 kgf/ cm²
(0.042 ft3  /cycle at 100psi)
Magazine Capacity  100pcs.(15-gauge finish nail)
Applicable Nail
(15-gauge finish nail) 
 Angle  34 degrees
Collation Tapes
Diameter  2.4mm x 3.0mm (0.095" x   0.12")
Length 32mm - 65mm (1-1/4"  -   2-1/2")
Standard Accessories  1 Safety glasses
 1 Nose Cap (A)
 1 Case
Note: Manufacturer reserves the right to change specifications of parts and accessories
          without notice. Standard accessories of parts may vary from country to country.

Copyright(C) 2000-2004 Hitachi Koki Co., Ltd All rights reserved