DH28PD

28mm (1-1/8") Rotary Hammer

Enable to improve working environment thanks to the highest dust extraction ratio and the fastest drilling speed in its class! Dust extraction ratio up by approximately 60% compared with our current model *1
Easier to collect dust remaining in the hole! *2!

• The dust box is easy to remove from the dust collection unit, empty and clean.
  
  *4: The maximum capacity of a dust box: Approximately 130 holes in concrete at drill diameter of 6mm and depth of 28mm.
• 

• According to applications, you can detach the dust collection unit and attach the provided cover over openings in the tool body. And then the DH28PD can be handled as a rotary hammer without dust collection system
• 

• According to applications, you can detach the dust collection unit and attach the provided cover over openings in the tool body. And then the DH28PD can be handled as a rotary hammer without dust collection system
• 

• You can switch actions to the 3 modes of "hammer drilling", "hammering only", and "drilling only" by turning the change lever while pressing the push button. When this rotary hammer is set to hammering only mode, the rotation is released by pressing the push button and turning the change lever to the neutral position. And then the mounted tool such as chisel or cutter can be adjusted to desired position by turning the grip.
• 

• It is easy to change the direction of bit rotation by pushing the push button.
• 

• Capacity: Concrete: Drill Bit
• 28mm (1-1/8") *

• Capacity: Concrete: Drill Bit
• 4-18mm (5/32-23/32") with dust collection unit

• Capacity: Concrete: Core Bit
• 80mm (1-1/4") *

• Capacity: Wood
• 32mm (1-1/4") *

• Capacity: Mild Steel
• 13mm (1/2") *

• Power Input
• 720W

• Bit Shank
• SDS-plus

• No Load Speed
• 0-1,050/min.

• Full Load Impact Rate
• 0-4,000/min.

• Overall Length
• 458mm (18-1/32")

• Weight
• 4.7kg (10.4lbs.)

• Standard Accessories
• Side Handle, Depth Stopper Cover, Carrying Case, Rubber Cap

• page top