DH 40MR
40mm Rotary Hammer
(SDS-max, Constant speed with variable
speed control)
 A very original design and innovative technology
high drilling speed with low vibration and noise level
Quicker self-drilling with better impact feeling
and low forward operator pressure
Internal double-insulation construction
with sturdy aluminum frame
Change lever for switching between "Rotation
+ Hammering" , "Neutral" and "Hammering only"
Constant speed with variable speed control
Soft-touch grip for easier handling
Variabel lock mechanism for easy-working-
12 steps- angle adjustment of chisels, etc.
Needle-pin type slip clutch
Gease-packed lubrication
Auto-stop carbon brushes
Leaflet1 881KB.pdf
Leaflet2 1,008KB.pdf
Leaflet3 100KB.pdf
Leaflet4 969KB.pdf
(Free Adobe Acrobat Reader 4.0 or higher required)
|
Specifications:
| Capacity (Max. diameter) |
Drill Bit |
40mm(1-9/16") |
| Core Bit |
105mm(4-1/8") |
| Bit shank |
SDS-max |
| Power Input |
950W |
| Impact energy per stroke |
10J |
| No-Load Speed |
240-480/min. |
| Full-Load Impact Rate |
1,320-2,650/min. |
| Overall Length |
435mm(17-1/8") |
| Weight |
6.5kg(14.3lbs.) |
| Standard Accessories |
1 Plastic case
1 Side Handle
1 Hex. bar wrench for M6
1 Hex. bar wrench for M5
1 Hex. bar wrench for M4
1 Stopper
1 Grease (A) |
|
