14.4V/18V Cordless Driver Drills
with Brushless Motor
- The Large Dia. Brushless Motor and Optimized Gear Ratio Offers...
- Most Powerful *1 Torque in its class & Significantly Increased Application Speeds
*1: Except for the Max Torque Hard of the DS18DBSL. As of September 2016. Among 14.4V/18V cordless driver drills made by leading power tool manufacturers (surveyed by Hitachi Koki).
*2: Compared to the previous models DS18DBEL
*3: Compared to the previous models DS14DBEL
*4: When drilling (in High Mode + Drill Mode) into SPF 76mm in thickness with a ø24mm (DS18DBSL) / ø20mm (DS14DBSL) auger bit.
- Runtime per Charge (approx.) *1
Number of screws driven in wood (Low Mode + Drill Mode)
*1: The values are for reference purposes. They vary according to the work material and conditions.
*2: ø8 x 75mm wood screws into American pine (with 6.5mm pilot holes)
*3: ø8 x 100mm wood screws into American pine (with 6.5mm pilot holes)
- Compact Design with a Shorter Overall Length
DS18DBSL / DS14DBSL: 175mm *
DS18DBEL / DS14DBEL: 202mmm
* The overall length varies by region.
- Double-Molded, Large Clutch Dial
is clearly readable even when it's worn out.
It's also easy to grip for better handling.
reduces torque (rpm) fluctuation in a low speed range and ensures stable operation.
This makes follow-up tightening and drill positioning easier.
(Continuous work within a low speed range may cause the temperature of
the unit to rise, activating a temperature protection circuit and automatically
Hitachi Original Brushless Motor Technology
- ► No wearing parts (carbon brushes, commutator, field coil)
- ► Hitachi original compact controller
- Long Lifetime, Maintenance-Free
The brushless motor offers a significantly extended product life cycle by eliminating trouble including armature burnout, layer short or commutator wear even in severe work environments. Besides, no carbon brush replacement is required.
||1.5 - 13mm (1/16 - 1/2") Keyless
||8 x 100mm (#20 x 4")
||8 x 75mm (#20 x 3")
|No Load Speed
||0 - 1,800/min.
||0 - 1,500/min.
||0 - 400/min.
||0 - 350/min.
||1.0 - 4.5Nm (9 - 40in-lbs.)
|Overall Length *1
|Vibration Total Values
(triax vector sum) *3
|Drilling into Metal
||Vibration Emission Value ah, ID < 2.5m/s2
Uncertainty K = 1.5m/s2
|Standard Accessories *4
||2 Batteries (BSL1850, BSL1830C or BSL1830),
Charger (UC18YFSL, UC18YSL3 or UC18YKSL)
|2 Batteries (BSL1450, BSL1430C or BSL1430),
Charger (UC18YFSL or UC18YKSL)
|Driver Bit, Battery Cover, Carrying Case|
*1: The overall length varies by region.
*2: According to EPTA-Procedure 01/2003.
*3: Vibration total values (triax vector sum) were measured according to EN60745-2-1.
*4: The included batteries and charger vary by country or area.
- In order to read a PDF file, you need to have Adobe® Reader® installed in your computer.